CENTRIFUGAL PUMPS | MANUFACTURING & REPAIR SERVICE //
CENTRIFUGAL PUMPS FOR THE FOLLOWING SECTORS
CENTRIFUGAL PUMPS FOR ENGINEERING
In Intercal Pumps we give solutions to engineering. We have been Centrifugal Pump Manufacturers since 1975, and bring our experience in order to solve your problem. You can contact us using the form and we will get in touch with you.
VISIT THE PAGE ON ENGINEERING
CENTRIFUGAL PUMPS FOR CONSTRUCTION
Centrifugal pumps for constructions in your prevention needs as Fire pumps with control panel and a great power to Centrifugal pumps for air conditioning or heating of buildings, with great reliability and durability. Made with materials of the highest resistance.
VISIT THE PAGE ON CONSTRUCTION AND HABITAT
CENTRIFUGAL PUMPS FOR WATER TREATMENT
B SERIES and NIR SERIES pumps are resistant to products such as sulfuric acid, caustic soda and bleach, working in various EDAR, ETAP and IDAM facilities and are the proposed by Pompes Intercal for water treatment. The simple seal with 318N duplex stainless steel protected spring achieves a high resistance to corrosion. The PX series pumps are mud resistant to temperatures up to 170ºC, the tightness achieved with a simple seal has permitted the elimination of the vaporization and storage of dried up mud.
CENTRIFUGAL PUMPS FOR AIR CONDITIONING
Intercal Pumps has centrifugal pumps for cooling and heating buildings. Robust pumps of great reliability so that you can count on comfort in hot or cold days. Horizontal pumps provide maximum energy savings in their use and with our experience we can advise you the best option for your needs.
CENTRIFUGAL PUMPS FOR AGRICULTURAL USE
Intercal Pumps for agricultural use has a number of pumps which, depending on the needed flow rate, we can guide you on the most suitable pump for your need. Our mission is to give the best solution in the use for large irrigated areas with minimum energy consumption for your need. Manufactured with maximum durability materials, specific engines to each case and our experience in this field enable us to offer you the best proposal.
CENTRIFUGAL PUMPS FOR CHEMISTRY
In Intercal Pumps we have centrifuges to use with high corrosive power chemical products. Tests with high concentrations of products such as sulfuric acid, caustic soda, chlorine bleach have endured the tests carried out. The special gaskets and the simple stainless steel seal achieve a high resistance to the products. The engines are certified by ATEX.
CENTRIFUGAL PUMPS FOR PAINT AND CATAPHORESIS
The B SERIES and NIR SERIES centrifugal pumps with innovative sealing obtain an absolute tightness, achieving not to contaminate the paint and extend the durability of the seal. Latty Ibérica and Pompes Intercal together with the Valladolid University in a research process have managed to bring new technologies to the sealing of centrifugal pumps.
CENTRIFUGAL PUMPS FOR FOOD USE
The B SERIES and NIR SERIES are suitable for use in hot stillage at 120ºC. Its stainless steel construction with a stationary double seal prevents depressurization. Also the pump starts are buffered achieving a greater lifespan.
Our pressure groups with speed variator operate at a constant pressure, with large variations in the flow demand. The speed variator achieves large energy savings with high efficiency motors IE1 and IE2.
Multi-stage pumps for: Fixed or transportable pressure cleaning systems, Pressure, Fire-Fighting, Boiler Feeding, Reverse Osmosis Groups, Water supplies in general, Installations and Irrigation, Thermal Plants, Circulation of distillates and condensates, ETAP, IDAM or E.D.A.R. In different materials such as Cast Iron GG-25, Nodular GGG-40 and Stainless Steels AISI-304; AISI-316; AISI-316L; AISI-904L MULTI-STAGE PUMPS
SPECIAL SEALING SYSTEM
The Technical Union of Latty Ibérica and Pompes Intercal in collaboration with the Valladolid University has managed to improve the seals of our series of pumps.The new technology applied in our sealed centrifugal pumps allows us to increase the possibilities and eliminate problems such as:
- In mud pumping at 170ºC, the sealing prevents water evaporation obtaining the elimination of the dried up mud in the case, up to now, the reason for pump failure.
- In the water treatment (wastewater treatment plants) this sealing enables it to resist substances at high concentrations of sulfuric acid, caustic soda and bleach.
- Paint and Cataphoresis. Using the sealing system prevents the contamination of the paints used.
CENTRIFUGAL PUMP SERIES
HORIZONTAL PUMPS: Horizontal Pumps: With our B, B-PX, B-PS Series and Common Collector Twin Pumps we are able to cover different utilities in various sectors such as the pumping of water, viscous liquids and suspended particles. Prepared for abrasive substances and other sectors such as cooling towers, thermal plants, compressed air, paint manufacturing and cataphoresis processes.
STANDARD PUMPS: Hydraulic performance and unified dimensions according to EN 733 (DIN STANDARD 24255). Standardization interchangeability of the various parts of the pump. It comprises 50 different pumps assembled with 5 sizes of support. For the same support size the axis, the bearings, the mechanical seal is or the packing, the impeller nut and bearing caps with their retainers are identical. We also have a number of non-standard models that complement this series.
SPLIT-CASE PUMPS: SPLIT-CASE pumps with the possibility of simple and double suction with one or two impellers. They can be used in continuous service S1 facilities and extreme conditions. High performance hydraulic chamber achieving energy savings. For pumping medium and large flow rate, it can be used in drinking water supplies, seawater desalination, petroCHEMISTRYs and thermal plants. It allows suctions of 180º and it can be intervened without dismounting through the upper chamber. They are manufactured in different materials such as: Cast iron A48 Class 40, Nodular cast iron DIN GGG40, Carbon steel, Brass, or Hasteloy and Stainless Steel AISI 304, AISI 304L, AISI 316, AISI 316L and AISI 904L. SPLIT CASE